Larryjc Posted December 11, 2018 Report Share Posted December 11, 2018 I'm planning to change the CWP and fit an LSD to my TR7V8 axle. Does anyone know what size of spanner one needs to undo the nut that holds the pinion in place? I did one of these many years ago but can't remember ( I know its quite large). I don't want to have the whole thing apart and then find I'm stuck without the right one. Quote Link to post Share on other sites
BusheyTrader Posted December 14, 2018 Report Share Posted December 14, 2018 From the TR7 Forum............ it looks like this may be what you're after. https://www.cromwell.co.uk/shop/hand-tools/ring/1-11-16inchx-1-7-8inch-a-f-ch-v-an-ring-spanner/p/KEN5821470K http://tr7triumph.com/forum/viewtopic.php?f=3&t=11532&p=82684&hilit=Crush#p82684 hope this helps Adam Quote Link to post Share on other sites
Larryjc Posted December 18, 2018 Author Report Share Posted December 18, 2018 Thanks for that - I'll look to borrow one from somewhere £60 is a tad expensive!!! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.