TR4 dash vents

[Grahamgl]

Gentlemen,

I am starting to restore my 1962 TR4 and restoring parts as I remove them. I am now working on the two dash vents. When I removed them the seals on each end of them, rubber, had deteriorated to crumble nature and thus will need replacing. According to the Moss catalogue the seals are no longer available. I assume a rubber or foam extrusion are my only options. What have other members used please.

Graham

[RogerH]

Hi Graham,

    if you can understand the shape/cross section of the rubber you may be able to get something from Woolies etc that is almost there.

Cut to length then superglue to form the circle.

 

Roger

[stillp]

Or try to find some better ones from a breaker. I might have a couple in the garage attic, I'll have a look tomorrow.

Pete

[brenda]

Give TR Bitz a ring loads of stuff in the storeage containers.

 

mike Redrose group.

[openroad]

Hi Graham,  I have tried to send you a PM, says you can't receive  !!

Cheers Conrad. 

[Z320]

Hi Graham,

you talk about item 11 (#610777) and itenm 18 (#610639)?

Will come also to this point when I put the dashboard out, former owner used tape.

Ciao Marco 

[KiwiTR6]

5 hours ago, RogerH said:

Hi Graham,

    if you can understand the shape/cross section of the rubber you may be able to get something from Woolies etc that is almost there.

Cut to length then superglue to form the circle.

 

Roger

Sent you a PM Roger.