PJR Posted November 12, 2018 Report Share Posted November 12, 2018 I have a triple weber conversion on the TR6 I recently purchased and the one nearest to the bulkhead makes a clicking sound on tickover and goes when revved - any thoughts? Quote Link to post Share on other sites
TriumphV8 Posted November 12, 2018 Report Share Posted November 12, 2018 Some play in the bearing, throttle shaft or linkage. Put your finger at both sides of the throttle shaft and feel the pulses. Apply some force and hear if the sound changes. Quote Link to post Share on other sites
PJR Posted November 12, 2018 Author Report Share Posted November 12, 2018 Thanks very much - will give it a go Quote Link to post Share on other sites
TriumphV8 Posted November 12, 2018 Report Share Posted November 12, 2018 Another idea is the venturi and fuel mixer behind. should not make noise at idle but who knows... They are both fixed with screws from the bottom that get loose from time to time... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.