mike797 Posted October 28, 2018 Report Share Posted October 28, 2018 Hello All. I am still after the average measurement to help find a fault on the back of my car. I am after the size from the diff face to the outside face of the trailing arm for a tr4a. These are the two faces where the driveshafts are fixed to. Thanks to my recent scare these are no longer the same and I need somewhere to start and I can not be sure that either were correct in the first place. I can see one bracket (the two notch) one is bent but that rear wheel is out the opposite way to what I would expect. The offside wheel tracking is out also, camber on both is not to the book. Who would have guessed I take it that tr5 and 6 are the same. Hope someone can help. thanks mike p. Quote Link to post Share on other sites
RogerH Posted October 28, 2018 Report Share Posted October 28, 2018 Hi Mike, I will look tomorrow - weather permitting. Roger Quote Link to post Share on other sites
david c Posted October 28, 2018 Report Share Posted October 28, 2018 PM sent. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.