Robert Price Posted October 2, 2018 Report Share Posted October 2, 2018 Does anyone have the old metal cover that fits on the G/Box tunnel over the speedometer drive? it would save me having to make one. Rob Quote Link to post Share on other sites
Waldi Posted October 2, 2018 Report Share Posted October 2, 2018 My original (?) cardboard tunnel did not have a separate cover, but it had a strip at the bottom of the tunnel. The speedo drive (A-type OD) was interfering with the card board and damaged that. Probably by 10-15 mm. I bought a new 2-piece tunnel from Moss, and although it looks nice, it has the same issue. Moss recommends to cut a hole and install a cover. I would not recommend the Moss 2-piece tunnel for that reason. It fits nicely without the speedodrive though. I am looking for a lid too, or will have to make myself one. Waldi Quote Link to post Share on other sites
openroad Posted October 2, 2018 Report Share Posted October 2, 2018 Hi Robert , i do believe I have one, I can send pics if you wish Conrad. Quote Link to post Share on other sites
Motorsport Mickey Posted October 2, 2018 Report Share Posted October 2, 2018 4 hours ago, Robert Price said: Does anyone have the old metal cover that fits on the G/Box tunnel over the speedometer drive? it would save me having to make one. Rob Available from Racetorations as are all the other covers and lids, or bungs separately. Mick Richards Quote Link to post Share on other sites
trtechie Posted October 2, 2018 Report Share Posted October 2, 2018 I just bought and fitted a fibreglass cover from Revington TR Quote Link to post Share on other sites
Waldi Posted October 2, 2018 Report Share Posted October 2, 2018 Thanks Mick; in hindsight I should have bought the Racetorations tunnel, as recommended elsewhere on this forum.... Classic example of “you get what you pay for”. Waldi Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.