MadMarx Posted October 1, 2018 Report Share Posted October 1, 2018 (edited) After Le Mans I've planned to test a different configuration at Spa. The event started promising with a pole position in Qualifying but I already felt that the new setup is worse than at Le Mans. Basically the spring rates between front and rear not fitting well on this test. The car is too oversteer. As an addition....the 3-piece wheels started leaking. The wheel on the rear left lost almost all its pressure during the race, so I couldn't keep up with the front people and finished 11. At race two, I've use the spare wheels with the harder compound tire....and freezing cold morning. That was a slippery thing. On this race, the rear wheel on the right side started leaking. For race 3 I've choose the rims which didn't leak and put the soft tires on them. I've finished somewhere in the middle of the pack....but with 3rd best top speed. 213 kph. My cameras have let me down. My backup system makes not so good videos: http://www.racspa.be/2018/rf2018/DOCS/Racing Festival 2018/Live/Belcar Histo/05_ClassificationByDivision_QUALIFYING.PDF http://www.racspa.be/2018/rf2018/DOCS/Racing Festival 2018/Live/Belcar Histo/05_ClassificationByClass_RACE 1.PDF http://www.racspa.be/2018/rf2018/DOCS/Racing Festival 2018/Live/Belcar Histo/05_ClassificationByClass_RACE 2.PDF http://www.racspa.be/2018/rf2018/DOCS/Racing Festival 2018/Live/Belcar Histo/05_ClassificationByClass_RACE 3.PDF Edited October 1, 2018 by MadMarx Quote Link to post Share on other sites
Hamish Posted October 2, 2018 Report Share Posted October 2, 2018 Enjoying the videos. The exhaust headers you made work well. Frustrating about the tyres but you certainly handle it well. I’m subscribed to your channel H Quote Link to post Share on other sites
MadMarx Posted October 2, 2018 Author Report Share Posted October 2, 2018 A fan video: Quote Link to post Share on other sites
MadMarx Posted October 2, 2018 Author Report Share Posted October 2, 2018 14 hours ago, Hamish said: Enjoying the videos. The exhaust headers you made work well. Frustrating about the tyres but you certainly handle it well. I’m subscribed to your channel H I've changed the valve springs before this event and that freed the revs above 6000 rpm. So I suppose some gain in power. The exhaust is doing okay. No complaint so far. Quote Link to post Share on other sites
MadMarx Posted October 24, 2018 Author Report Share Posted October 24, 2018 (edited) found another video snippet: Edited October 24, 2018 by MadMarx Quote Link to post Share on other sites
jellison Posted October 25, 2018 Report Share Posted October 25, 2018 (edited) God that thing corners on rails with zero roll. Edited October 25, 2018 by jellison Quote Link to post Share on other sites
MadMarx Posted October 25, 2018 Author Report Share Posted October 25, 2018 Yes the car does corner, but I didn't find any rails. Quote Link to post Share on other sites
MadMarx Posted January 23, 2019 Author Report Share Posted January 23, 2019 (edited) Edited January 23, 2019 by MadMarx Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.