brian-nz Posted September 22, 2018 Report Share Posted September 22, 2018 Hi. While my 1974 CR TR6 motor is out and and apart I am thinking about power steering. The block is orginally from a saloon according to the block numbers, coverted to TR6 spec. Can a saloon power steering unit be transferred to the TR without any modifications (straight swap over). Have searched for previous threads but cannot find anything Thanks Brian Quote Link to post Share on other sites
trtechie Posted September 22, 2018 Report Share Posted September 22, 2018 Hi Brian im afraid i am not familiar with the saloon power steering set up, I fitted hydraulic power steering to my TR6 and the kit came with a new steering rack, I had looked at electric versions but didnt think I could get the motor to fit behind the dash with the wiring loom aswell, however there will be others on the forum who have managed to go down this route, it certainly is the easiest of the two choices. Quote Link to post Share on other sites
TriumphV8 Posted September 22, 2018 Report Share Posted September 22, 2018 In the general chat this is just a topic Marco does a swap with a Opel Corsa electrical unit what would be my todays choice, too. CCD also offers a ready to use PAS. I would expect another PAS from a donnor car would not fit right out of the box. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.