Glynn Hobbs Posted August 12, 2018 Report Share Posted August 12, 2018 I have a friend here in France who needs a speedo repair for his TR3a. Can't find one here, so can anyone reccommend a good repairer in the UK please? Cheers Glynn Quote Link to post Share on other sites
iain Posted August 12, 2018 Report Share Posted August 12, 2018 Hi Glynn These guys did a very good job of re calibrating my speedo and making up some Halda cables for me. www.speedograph-richfield.com Iain Quote Link to post Share on other sites
Ransomes256 Posted August 12, 2018 Report Share Posted August 12, 2018 Glynn, Always had good service from these people. www.speedycables.com Neil Quote Link to post Share on other sites
Nigel Triumph Posted August 12, 2018 Report Share Posted August 12, 2018 Glynn, Always had good service from these people. www.speedycables.com Neil +1 Quote Link to post Share on other sites
Glynn Hobbs Posted August 12, 2018 Author Report Share Posted August 12, 2018 Thanks Guys, but I should have said that the problem is inside the head, not the cable. The problem is a broken pin connecting the needle to the drive, so the head needs stripping for the repair. Quote Link to post Share on other sites
BlueTR3A-5EKT Posted August 12, 2018 Report Share Posted August 12, 2018 Thanks Guys, but I should have said that the problem is inside the head, not the cable. The problem is a broken pin connecting the needle to the drive, so the head needs stripping for the repair. I have a couple of old units if you get stuck. Peter W Quote Link to post Share on other sites
Ransomes256 Posted August 12, 2018 Report Share Posted August 12, 2018 Glynn, Speedycables repair, manufacture all instruments and cables. Neil Quote Link to post Share on other sites
G Denson Posted August 12, 2018 Report Share Posted August 12, 2018 Glynn I would recommend John Ostick of JDO-Instruments in Keighley West Yorkshire Tel 01535672125:Web www.jdo 1.com :email john_ostick@hotmail.com I have used and found his work excellent in the past. Contact him to discuss the problem and get a cost and time frame to complete the work. Best of luck with your problem. Cheers Gordon Quote Link to post Share on other sites
Glynn Hobbs Posted August 12, 2018 Author Report Share Posted August 12, 2018 Thanks everyone for your information. - I have passed it all on to my friend who is contacting the companies directly. Regards Glynn Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.