Jump to content

TR6 HS6 SU Carb Choke cable


Recommended Posts

Hi All,

 

I am looking for some advice , I have a US 1969 TR6 that had been converted to right hand drive, during the conversion a set of HS6 SU have been fitted, the choke cable from the old cards does not reach the choke connector for the first SU (nearest the bulk head )

Given the cost of replacement cables can anyone advise which one is best to order?

 

Thanks

Mike

Link to post
Share on other sites

I think the cable for the PI cars would be long enough. Other options are modifying the existing cable by removing one of the cables and fitting a longer one (from a bicycle ). Another is to fit a rod that connects the jet assemblies together, thus requiring only one cable. This is shown in the Moss catalog with the SU carb conversion kits. The parts should be available from Burlen or from used sources. It may also require an anchor to support the cable, which is easily made. This is the route I chose when changing to SU carbs from the factory ZS units.

Berry

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.