Jump to content
Sign in to follow this  
DaveN

Overdrive Switch

Recommended Posts

Had problems with the Overdrive that turned out to be the switch. So I replaced it, but this one is nearly as bad in as much as the overdrive will keep dropping out and reengaging.

Are they all from the same source or are some better than others?

Definitely the switch because if I put pressure on it I can get The overdrive to cycle!

 

Or has anyone managed a good modification?

Share this post


Link to post
Share on other sites

The chance of your switch failing and your replacing it with a random switch with identical fault is probably small. I would be checking the connections, making sure there are no intermittent opens. Break and make connections and give them a wiggle whilst overdrive is in. If the fault can be fixed with pressure on switch it could be - if you have a metal column shroud - that the wiring is shorting to it. The terminals are exposed on some switches. Just wrap switch with tape .

 

Mike

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.