SeanF Posted June 17, 2018 Report Share Posted June 17, 2018 The rear GB mount on my CR TR6 (1974) was fitted with two rectangular shims, each with two holes which match the mounting holes in the bracket and chassis mount. I did not take a detailed picture when I stripped it down and can't remember whether these were between the mounting bracket and the chassis bracket, or underneath the chassis bracket to provide extra clamping rigidity to the bolts. I assume they go between rather than below but I would appreciate it if someone could advise. Many thanks and Happy Fathers Day! Sean Quote Link to post Share on other sites
SeanF Posted June 17, 2018 Author Report Share Posted June 17, 2018 Guys, don't worry, I've found the answer in the Moss catalogue. Item 74 https://www.moss-europe.co.uk/shop-by-model/triumph/tr5-6/clutch-transmission-drivetrain/gearboxes-components/engine-gearbox-mountings-tr5-6.html Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.