Willie Posted June 13, 2018 Report Share Posted June 13, 2018 Hi All, I am hoping someone will pick this request up and confirm a point of confusion before my TR4 gets the gearbox overhaul completed. WHICH WAY ROUND DOES THE CLUTCH RELEASE BEARING GO? Does the larger diameter flat face point outwards from the bellhousing as the original TR4 Workshop Manual illustrates? That is how the bearing is set currently, but in the next couple of hours we will either commit to that or have to open the assembly up and swap it round. I hope this reaches an authority on the subject in time!! Best wishes Willie Quote Link to post Share on other sites
stuart Posted June 13, 2018 Report Share Posted June 13, 2018 Like this. Stuart. Quote Link to post Share on other sites
Willie Posted June 13, 2018 Author Report Share Posted June 13, 2018 Very many thanks Stuart. Wide flat face facing outwards is happily what we have installed. Just approaching new hydraulics and then we'll know if we have a problem!! Best wishes Willie Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.