Jump to content

URGENT CONFIRMATION NEEDED


Recommended Posts

Hi All,

I am hoping someone will pick this request up and confirm a point of confusion before my TR4 gets the gearbox overhaul completed. WHICH WAY ROUND DOES THE CLUTCH RELEASE BEARING GO? Does the larger diameter flat face point outwards from the bellhousing as the original TR4 Workshop Manual illustrates? That is how the bearing is set currently, but in the next couple of hours we will either commit to that or have to open the assembly up and swap it round.

 

I hope this reaches an authority on the subject in time!!

 

Best wishes Willie

Link to post
Share on other sites

Very many thanks Stuart. Wide flat face facing outwards is happily what we have installed. Just approaching new hydraulics and then we'll know if we have a problem!!

 

Best wishes Willie

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.