Coulstock Posted June 6, 2018 Report Share Posted June 6, 2018 Hi all, Is there an easy way to fix the spire nut next to the inner wing for the headlamp bowl. I can't find anything on this subject and think i must be missing the obvious. I was going to fit a self tapping screw but want to do it as the book shows, Many Thanks, Nick Quote Link to post Share on other sites
colin3511 Posted June 6, 2018 Report Share Posted June 6, 2018 Hi Nick, The bowl is usually pop riveted in 3 places to the wing and valance. They have a large outer diameter as the pre drilled holes are quite large. Hope that helps. Colin. Quote Link to post Share on other sites
stuart Posted June 7, 2018 Report Share Posted June 7, 2018 I fit Rivnuts then you can fit the bowls with machine screws. Stuart. Quote Link to post Share on other sites
Coulstock Posted June 9, 2018 Author Report Share Posted June 9, 2018 Thanks Guys Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.