Jump to content
Forum software update now live Read more... ×
Sign in to follow this  
John Morrison

Tr 4 Door Reassemby

Recommended Posts

In the process of reassembling everything back on to a newly painted door,

am I correct in thinkling I can fit both the inner and outer weather strips along the top,

and then the glass?

 

John.

Share this post


Link to post
Share on other sites

Hi John,

glass first - then weather strips.

 

Roger

That is the way I did mine and it was fine

..... Andy

Share this post


Link to post
Share on other sites

Channels in, glass next fit up but leave the bottom stop hanging so you can wind down window down to its full depth.Now you should have room to get those pesky clips in using Moss's tool

designed for this.You will drop the clips but easily retrieved.

Fun it is not but you will get there.

Regards Harry

Share this post


Link to post
Share on other sites

Water curtains first BTW.

Stuart.

Share this post


Link to post
Share on other sites

Stuart,

 

Water curtains first? How do I get at the gubbings brings then?

 

John.

Share this post


Link to post
Share on other sites

You can still get to everything as you can push the front and rear out of the way sufficiently to assemble stuff, the one on the glass will fold out the way at the bottom of the frame, fit the lower stop and wire restrainer last.

Stuart.

Share this post


Link to post
Share on other sites

Put some wood or polystyrene in the bottom of the door.

 

Now if you let the glass slip, or drop the end of the regulator etc you won't put a dent into the door.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×