cookie Posted May 11, 2018 Report Share Posted May 11, 2018 Hi, Have just replaced the windscreen frame on a rebuild project and have problems with the center fixing. Both the main fixing legs are bolted tight to the bracket inside the wing. the 2 outside fixing plates are almost touching the top of the dash. But the center one has a large gap between the bracket and the dash, about 3/8", haven't tightened the center bolt too tight as didn't want to bend the bracket. Any ideas. Thanks Dave Quote Link to post Share on other sites
RogerH Posted May 11, 2018 Report Share Posted May 11, 2018 Hi Dave, release the two main legs and get the three dash top screws in and screwed a fair way in. Then do the legs. Roger Quote Link to post Share on other sites
cookie Posted May 11, 2018 Author Report Share Posted May 11, 2018 Ah OK thanks, sounds like I've done it the wrong way round. Quote Link to post Share on other sites
Grahamgl Posted May 11, 2018 Report Share Posted May 11, 2018 Question: When were the TR Register’s Articles of Association changed to include a “shared “ membership? Graham Quote Link to post Share on other sites
cookie Posted May 11, 2018 Author Report Share Posted May 11, 2018 Is that a problem? a mate and I are both restoring a TR6 together. Let me know why thats a problem Thanks Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.