Jump to content
Sign in to follow this  
d2alfa

TR4a Engine Mounting

Recommended Posts

Hi,

I have taken my engine out for a rebuild and notice that the fitted rectangular engine mounting blocks include off-set threaded bars.

As fitted the blocks have their long side vertical but the bars facing the engine are nearer the bottom on one side and nearer the top on the other side.

It is probably better to get the blocks in their correct position before offering up the engine even if not fully tightened.

Should the blocks actually be mounted with their long side vertical or horizontal?

What should be the position of the threaded bars, nearer the top or nearer the front depending on the answer to the previous question?

Thanks

D2

Share this post


Link to post
Share on other sites

I cant help with the orientation but I would suggest replacing the rectangular ones with circular Land Rover ones. I and a number of others on here have done that. They are a bit less compliant than the rectangular ones.

Edited by peejay4A

Share this post


Link to post
Share on other sites

Long side vertical

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.