AJ2014 Posted March 25, 2018 Report Share Posted March 25, 2018 Hi I am looking for the correct position for wiring loom tags on a '55 TR2. I've had lots of new metal inc floor pans and boot floor etc and need to fit new tags through the car where missing. Has anyone previously documented this and could share? Kind regards Ade Quote Link to post Share on other sites
vivdownunder Posted March 25, 2018 Report Share Posted March 25, 2018 If you can get hold of a Factory Spares Catalogue, page 81 Plate AG shows the front inner guard wiring tag layout. Page 83 Plate AH shows where the tags went on the cockpit rear floor and boot floor. Quote Link to post Share on other sites
AJ2014 Posted March 25, 2018 Author Report Share Posted March 25, 2018 Thanks for the response Viv, I have that catalogue (never thought to look in there). Just looking for any info on the floorpans and the inner footwells/under dash area now please. Regards Ade Quote Link to post Share on other sites
stuart Posted March 26, 2018 Report Share Posted March 26, 2018 This may help. Also add a couple along the outside of the R/hand floor too. Stuart. Quote Link to post Share on other sites
BlueTR3A-5EKT Posted March 26, 2018 Report Share Posted March 26, 2018 This may help. Also add a couple along the outside of the R/hand floor too. Stuart. TS 1013 002 - Copy.jpg TS 1013 003 - Copy.jpg TS 1013 019.jpg Do you need the telescopic rear shock conversion brackets to go through the holes in the rear floor? If that is what the holes were for. Peter W Quote Link to post Share on other sites
stuart Posted March 26, 2018 Report Share Posted March 26, 2018 Do you need the telescopic rear shock conversion brackets to go through the holes in the rear floor? If that is what the holes were for. Peter W No thanks I had a set to go with the car (car now resides with another owner) and I still have a spare set. Stuart. Quote Link to post Share on other sites
AJ2014 Posted March 26, 2018 Author Report Share Posted March 26, 2018 Thanks for the photos Stuart, very much appreciated Regards Ade Quote Link to post Share on other sites
Dave Larnder Posted March 27, 2018 Report Share Posted March 27, 2018 No thanks I had a set to go with the car (car now resides with another owner) and I still have a spare set. Stuart. Hi Stuart Do you have any photos of that telescopic conversion kit? thanks Dave Quote Link to post Share on other sites
stuart Posted March 27, 2018 Report Share Posted March 27, 2018 Hi Stuart Do you have any photos of that telescopic conversion kit? thanks Dave Dont think so but I think Roger (Pogo) has as he has them on his TR2, they are specific to pre 60K body shells Stuart. Quote Link to post Share on other sites
Pogo Posted March 31, 2018 Report Share Posted March 31, 2018 Dave Like Stuart says I have a telescopic conversion on my '2. I'll try to dig some photos out, or take some new ones. Be warned - it ain't pretty! Roger Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.