Jump to content

Anti-roll bar


Recommended Posts

Thanks for the replies - excellent and speedy as always!

 

I've tried Revington, with no success :(

 

Phil, do you have a photo of the brackets? As Ian says, there seems to be a double-thickness for the vertical-link bolt: Just trying to size-it up so I can make some myself, if needed. (Deano - this is my fall-back plan!)

 

Thanks again chaps!

Adey

Link to post
Share on other sites

Adey, I've got a set on the shelf - they look like a simple structure made of 3mm steel with a double section in the middle, let me know if you need detailed dimensions...

 

 

post-8404-0-86816300-1515605014_thumb.jpg

Link to post
Share on other sites

Fantastic!

Dims would be good - thought Id use 5mm thick angle for the whole bracket?

Thanks again - photo very useful :)

Ade

Hi Ade, I would think 3mm preformed angle would be more than strong enough especially as preformed is slightly thicker in the corner.

Chris

Link to post
Share on other sites

Ade, sorry I promised some dimensions but have just got back after a hectic week.

 

It's basically a bit of 1" X 1 1/2" angle iron - if you are going to make your own and need the exact dimesions let me know.....

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.