Z320 Posted January 7, 2018 Report Share Posted January 7, 2018 (edited) Hi, additional to my "front diff mount strengthen set" I want to show you my repair set for a broken rear mount. Last year I realised the rear left mount was pulled out, but I wanted to drive and not wo weld - and for welding it correctly I want to lift the body from the frame. Not time for that - and no need. I made a spare part on my lathe to bolt, very easy, works lovely. Can also been made every easy from a threaded bar and nuts from B&Q. Attention: PU bush has to be cut out for the lower washer, it can´t be compressed. Ciao Marco 6 photos deleted because of limited data base at the forum Edited May 30, 2020 by Z320 Quote Link to post Share on other sites
RogerH Posted January 7, 2018 Report Share Posted January 7, 2018 Very neat Marco, the weld breaks so do away with the weld. Now that is Boeing 707 technology. If something cracks; cut out the area where the crack is. Roger Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.