david42 Posted December 26, 2017 Report Share Posted December 26, 2017 I need a template for the metal shield which i have seen on the forum but cannot find. Quote Link to post Share on other sites
Fireman049 Posted December 26, 2017 Report Share Posted December 26, 2017 David ~ What metal shield is this?? Tom. Quote Link to post Share on other sites
Ian Vincent Posted December 26, 2017 Report Share Posted December 26, 2017 I imagine it is the blanking plate that converts LH to RH drive and vice versa. Rgds Ian Quote Link to post Share on other sites
Fireman049 Posted December 26, 2017 Report Share Posted December 26, 2017 Hi david42 ~ Where about's are you located? Tom. Quote Link to post Share on other sites
BlueTR3A-5EKT Posted December 27, 2017 Report Share Posted December 27, 2017 Do you mean the bulkhead sealer plate in the rear of the front wing area, with a rubber seal down the side that presses against the wing inner surface and a 'D' shaped rubber on the top? Tops the crud filling up the gap between wing and bulkhead end panel. If so it was me who posted a pdf of the NOS item i have as a template to print out and cut round. See post #2 in this thread http://www.tr-register.co.uk/forums/index.php?/topic/62817-tr3-inner-wing-baffles/&do=findComment&comment=538584 Peter W Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.