Jump to content

Accelerator Pedal limit screw


Recommended Posts

Dear All,

 

There is no screw or provision for one on my 4, which was rebuilt a few years ago, and it appears that although listed in the Moss catalogue, it doesn't show how or where this is fitted in the footwell.

 

It appears to be missing on a few other cars I have seen, perhaps for the same reason (missed in rebuild).

 

I am keen to make one up to avoid overstraining the carb linkage in red mist moments.

 

=8-))

 

Does anybody have a pic they could share of the set up? I assume the screw is into a welded in nut somewhere on the bulkhead.

 

Thanks

 

Mike

Link to post
Share on other sites

post-9073-0-35877000-1496145219_thumb.jpgpost-9073-0-57120200-1496145236_thumb.jpgpost-9073-0-88869800-1496145252_thumb.jpgHope the attached pics help Mike. The 1/4" UNF limit stop screw passes through the lower hole in the RH pedal mounting bracket into a captive nut on the bulkhead and is set in the correct position with a lock nut. Do you need dimensions to assess exactly where to fit?

 

Tim

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.