Graham Posted April 14, 2017 Report Share Posted April 14, 2017 At one point in the future I know UOV will need a new rad and whilst I was doing this I will probably bite the bullet and go to thin belt, alternator and electric fan. My question though is would it be easier to remove the front panel to get better access to do this and if so how do you do it, and looking to the future is there any mods that allow easier removal for future access requirements ? Quote Link to post Share on other sites
iain Posted April 14, 2017 Report Share Posted April 14, 2017 Hi Graham to remove the radiator unfortunately you have no choice but to remove the front apron To make it easier in the future, do everything you can think of whilst the apron is off..........its not a job you want to repeat too frequently. Iain Quote Link to post Share on other sites
Don Elliott Posted April 18, 2017 Report Share Posted April 18, 2017 Put it all back together using stainless steel nuts and bolts so it will be easier next time around. Quote Link to post Share on other sites
mjdearing Posted April 18, 2017 Report Share Posted April 18, 2017 If you have any engine work planned the rad will come out with the cylinder head off,but to do what your planning it would be far easier with front removed. +1 for stainless. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.