nibbo Posted February 13, 2017 Report Share Posted February 13, 2017 Hi Guys.....I am putting my TR6 project back together and was wondering if anybody had any pictures or info as to where and how the foam column seals fit to the bulk head ? Ta in advance Nigel Quote Link to post Share on other sites
Waldi Posted February 13, 2017 Report Share Posted February 13, 2017 Nigel, the Moss catalogue shows them pretty clearly. You write "foam", I assume you mean "felt"? If not, apologies for rhe confusion. Waldi Quote Link to post Share on other sites
foster461 Posted February 14, 2017 Report Share Posted February 14, 2017 Nigel, the Moss catalogue shows them pretty clearly. You write "foam", I assume you mean "felt"? If not, apologies for rhe confusion. Waldi This may be a later car feature but my 74 car for sure has two foam donuts that go between that forward bracket and the firewall. http://trf.zeni.net/TR6bluebook/index.php?page=117 Item # DJ22 in the TRF graphic. Stan Quote Link to post Share on other sites
Mark69 Posted February 14, 2017 Report Share Posted February 14, 2017 Something I have come across a couple of times , the anti torque bracket on my steering column is not the h shape shown in above diagram but two bars minus the cross section Just for info my six was fitted with a later steering column with steering lock I have since replaced with original and put the ignition switch back on the switch plinth. Info gratefully received. Mark Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.