Richardtr3a Posted January 2, 2017 Report Share Posted January 2, 2017 (edited) The winter project is to remove the 2 x H6 SU and send them away to a specialist for rebuilding. Please send me the supplier who has given you a good service. If someone has let you down send me a PM Thanks Richard & H ( sunny and bright in Sussex) Edited January 2, 2017 by Richardtr3a Quote Link to post Share on other sites
openroad Posted January 2, 2017 Report Share Posted January 2, 2017 Try Turner Carbs , he is in Colsterworth near Grantham, on ebay etc. Excellent , Cheers, Conrad Quote Link to post Share on other sites
McMuttley Posted January 2, 2017 Report Share Posted January 2, 2017 certainly second Andrew Turner http://www.su-carbs.co.uk/phdi/p1.nsf/supppages/turner?opendocument&part=4 turned these.... into these.... Quote Link to post Share on other sites
rcreweread Posted January 2, 2017 Report Share Posted January 2, 2017 Richard Andrew Turner is excellent, very knowledgeable and always pleased to help, if you contact him. I've also had excellent service from Glenn Watson at G.W. Carbs 7 Blenheim Close | Bicknacre | Danbury | Chelmsford | Essex CM3 4NE | UK His website is SUCarbs.co.uk - lots of photos of his work on here and I can vouch for the quality of his work - I put a pair of his restored HS6s and manifold on my TR4 four years ago and they still look good today - he does the carbs to concours standard whether you like it or not! Hope this helps Cheers Rich Quote Link to post Share on other sites
BlueTR3A-5EKT Posted January 4, 2017 Report Share Posted January 4, 2017 (edited) The winter project is to remove the 2 x H6 SU and send them away to a specialist for rebuilding. Please send me the supplier who has given you a good service. If someone has let you down send me a PM Thanks Richard & H ( sunny and bright in Sussex) Possibly start with Burlen at Salisbury. They suggested prices for restoration is here. http://sucarb.co.uk/restoration-prices or any of the specialist Triumph spares suppliers. http://sucarb.co.uk/restoration-and-exchanges/ Peter W Edited January 4, 2017 by BlueTR3A-5EKT Quote Link to post Share on other sites
steamy Posted January 18, 2017 Report Share Posted January 18, 2017 Richard, If you havn't sorted out a supplier then consider 'Carburettor Excange Leighton Buzzard Beds They did a great job on my pair of HS6's and was about £220 the pair 12 weeks lead time at moment.....but they look like new! Ian Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.