nigel62 Posted December 5, 2016 Report Share Posted December 5, 2016 Hi, I'm in need of a new dashtop and was wondering if i can get it recovered as the foam is in good condition or if not where to buy one from as theres a few places that sell them at different prices and wondered if there was any difference in the quality? Cheers Nigel Quote Link to post Share on other sites
openroad Posted December 5, 2016 Report Share Posted December 5, 2016 Apparently the TR shop one is pretty good, but yours sound ok , a decent upholsterer would do a decent job, if you do really fancy it. Cheers, Conrad. Quote Link to post Share on other sites
Mark69 Posted December 5, 2016 Report Share Posted December 5, 2016 +1 for tr shop. Quote Link to post Share on other sites
mike3739 Posted December 6, 2016 Report Share Posted December 6, 2016 +2 TR Shop Cheers Mike. Quote Link to post Share on other sites
stuart Posted December 6, 2016 Report Share Posted December 6, 2016 TR Shop do the best ones, re-covering can look good but then you need everything else to match. Stuart. Quote Link to post Share on other sites
JohnG Posted December 6, 2016 Report Share Posted December 6, 2016 Don't want to hijack the thread, but, a related question; How easy is it to remove and replace the dashtop? Quote Link to post Share on other sites
harrytr5 Posted December 6, 2016 Report Share Posted December 6, 2016 Remove windscreen frame complete. Wide blade filler knife to get under vinyl. Remove dash and release the metal dash.Release steering column. Once all stuff is cleared fit dash top and reverse the procedure. As winter is here you can take your time. A lot of work but do able. Regards Harry Quote Link to post Share on other sites
JohnRoberts Posted December 6, 2016 Report Share Posted December 6, 2016 Hi Guys A question about removing the metal dash panel. Is it possible to completely it from the car without removing the steering assembly. Regards JohnR Quote Link to post Share on other sites
pfenlon Posted December 7, 2016 Report Share Posted December 7, 2016 Hi Guys A question about removing the metal dash panel. Is it possible to completely it from the car without removing the steering assembly. Regards JohnR Yes Quote Link to post Share on other sites
Guest ntc Posted December 7, 2016 Report Share Posted December 7, 2016 Yes Short and sweet PF bad as me Quote Link to post Share on other sites
JohnRoberts Posted December 7, 2016 Report Share Posted December 7, 2016 Hi Guys Quite right the answer is yes. Have removed it today,careful use of tin snips helped. It now as had the POR 15 treatment. Regards JohnR Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.