Ian Vincent Posted November 15, 2016 Report Share Posted November 15, 2016 I am in the process of installing one of the much recommended on here Revington steering arm kits to my TRT3a. At the end of the instructions it says to set the toe in to 20 minutes. Is that going to be 20 minutes each side or 20 minutes total? I know I could phone Revington, but I just thought someone on here might know. Rgds Ian Quote Link to post Share on other sites
Lebro Posted November 15, 2016 Report Share Posted November 15, 2016 Each side, according to Wikipedia, & I think that's how I did mine. https://en.wikipedia.org/wiki/Toe_(automotive) Bob. Quote Link to post Share on other sites
Ian Vincent Posted November 19, 2016 Author Report Share Posted November 19, 2016 In the end I have to admit, I phoned up Revington only to find that I was the second person to phone and ask the same question that morning. And the answer - sorry Bob, 1/3 degree overall and not each side. Rgds Ian Quote Link to post Share on other sites
Lebro Posted November 19, 2016 Report Share Posted November 19, 2016 (edited) Dohh !! Oh well, next time I get under there I may re-adjust, but it all seem to run very well as is, & any tire wear is not even visible. Bob. Edited November 19, 2016 by Lebro Quote Link to post Share on other sites
Motorsport Mickey Posted November 20, 2016 Report Share Posted November 20, 2016 But more understeer than you should have Bob, that's what too much toe in does. Mick Richards Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.