mark_smugglers Posted October 19, 2016 Report Share Posted October 19, 2016 Hi Am (nearly) at the point where I can lift the body off on my restoration. So my attention is turning to enviro strip vs (gentle) blasting. Enviro strip have quoted: £890 plus vat for tub and all panels including hard top £495 plus vat for primer Plus £380 plus vat for collection to and from West Sussex Are these prices similar to what others in the UK have been able to negotiate with them? My alternative choice but Is around £1,000 including vat for a local blasting company. Plus collection obviously. All input welcome. Thanks Quote Link to post Share on other sites
Steve T Posted October 19, 2016 Report Share Posted October 19, 2016 About the same as I was quoted. Quote Link to post Share on other sites
openroad Posted October 19, 2016 Report Share Posted October 19, 2016 Blasting can be brutal, depends if someone really does know what they are doing, I have been on the receiving end ! Have you tried a quote from ProstriP in Nottm, I have used them, with good results. Good luck, Conrad. Quote Link to post Share on other sites
Motorsport Mickey Posted October 19, 2016 Report Share Posted October 19, 2016 (edited) Also try Ribble technology in Lancs (don't know where you are your signature hasn't any detail) our Pete Fenlon on the forum has his pyrolised (heat treated for paint removal) then a dip and wash and I believe competes very attractively against those prices you've quoted. http://www.paint-strip.co.uk/ Mick Richards Edited October 19, 2016 by Motorsport Mickey Quote Link to post Share on other sites
mark_smugglers Posted October 19, 2016 Author Report Share Posted October 19, 2016 Thanks all. Mick I'm in West Sussex Regards Quote Link to post Share on other sites
Mark69 Posted October 19, 2016 Report Share Posted October 19, 2016 I used envirostrip for all panels fantastic results. I had the tub blasted by a very experienced blaster and I have to say results were good , but there were very very slight distortion in some of the larger panel. The rear valence , rear deck were left well alone. Envirostrip will do a deal for cash;). Mark Quote Link to post Share on other sites
250 Posted October 20, 2016 Report Share Posted October 20, 2016 Morning Mark, FYI My 250 tub and all panels is being picked up tomorrow by Ribble Technology Prices quoted below , pick up is nearer than you though. Bake & wash £540 + Vat De-rust & Phosphate` £330 + Vat Primer finish £375 + Vat Transport £160 + Vat (collection and delivery) Regards Mark. Quote Link to post Share on other sites
Bill Bourne Posted October 20, 2016 Report Share Posted October 20, 2016 Hi Am (nearly) at the point where I can lift the body off on my restoration. So my attention is turning to enviro strip vs (gentle) blasting. Enviro strip have quoted: £890 plus vat for tub and all panels including hard top £495 plus vat for primer Plus £380 plus vat for collection to and from West Sussex Are these prices similar to what others in the UK have been able to negotiate with them? My alternative choice but Is around £1,000 including vat for a local blasting company. Plus collection obviously. All input welcome. Thanks Yes - but as mentioned discuss method of payment best Bill Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.