Jump to content

Grinnall steering linkage

Recommended Posts

Can anyone tell me the correct assembly sequence for the steering gear on the TR7/8 please? I'm putting my Grinnall back together and can't get the in-engine bay upper linkage to pull up to the wavy washer.


Many thanks




Link to post
Share on other sites

Hello Keith,


Have you tried adjusting the collapsable spacer within the cabin to pull up the lower part of the upper collumn.


There is a reasonable picture in the Rimmers catalogue.




Link to post
Share on other sites
  • 2 weeks later...

Hello Ian, thanks for this. I'll have a look but I think if I pull the column up further there won't be much engagement with the splines at the rack. I have spacers fitted to lower the subframe relative to the chassis so the bonnet clears the air filter. At least I hope it will. I haven't got that far yet.

Link to post
Share on other sites

Hi Keith,


Do you have a power steering rack? If so, then its likely the TR7 steering linkage will not fit. Grinnall used the different, one - piece TR8 part.


They are like hens teeth but I managed to persuade Robsport to sell me one about a year ago. Worth checking?

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.