Richard71 Posted October 3, 2016 Report Share Posted October 3, 2016 Hi Folks, I've been advised to fit a "20a slow blow fuse" in my Revotec electric fan circuit, I've searched the Interweb and can only find glass fuses where I would much prefer the spade type. My question is this, are they manufactured in the spade type format, if so, where to buy? Thanks in advance, Richard. Quote Link to post Share on other sites
Guest ntc Posted October 3, 2016 Report Share Posted October 3, 2016 http://www.mouser.co.uk/Circuit-Protection/Fuses/Automotive-Fuses/_/N-ba8b5 Quote Link to post Share on other sites
Richard71 Posted October 3, 2016 Author Report Share Posted October 3, 2016 Good handy website that, thanks Neil, unfortunately they don't supply what I'm looking for. Quote Link to post Share on other sites
Guest ntc Posted October 3, 2016 Report Share Posted October 3, 2016 I used the filters and found loads plus holders Quote Link to post Share on other sites
RobH Posted October 3, 2016 Report Share Posted October 3, 2016 On that site if you look at page 2 you will find two to choose from with the ratings you ask for. Quote Link to post Share on other sites
Richard71 Posted October 3, 2016 Author Report Share Posted October 3, 2016 Thanks Guys, The only one I can see on page 2 is 32vdc, doesn't that matter. Does either of you care to post a link to the specific fuse please. Quote Link to post Share on other sites
RobH Posted October 3, 2016 Report Share Posted October 3, 2016 (edited) No that does not matter - its the maximum voltage it will disconnect without arcing problems. Fine for use on a 12v system. That is a mini fuse though- there's a bigger one a bit further down the page but it costs quite lot more. Edited October 3, 2016 by RobH Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.