Richard71 Posted September 23, 2016 Report Share Posted September 23, 2016 I remember seeing a photo(s) here on the forum most likely posted by Stuart detailing the ideal locations for the above. I've searched the archive in vain, can anyone help out please? Richard. Quote Link to post Share on other sites
Rod Thomason Posted September 24, 2016 Report Share Posted September 24, 2016 Hi Richard Try retromanufacturing.com look at retromat dampening Quote Link to post Share on other sites
Richard71 Posted September 24, 2016 Author Report Share Posted September 24, 2016 Thanks Rod, I already have pads, what I'm looking for are the optimum locations on the car to place them, pics would be great. Richard. Quote Link to post Share on other sites
Atl TR6 Posted September 24, 2016 Report Share Posted September 24, 2016 (edited) This is where I placed them on the shelf. I also placed one at the back of the each floor pan....(picture is before floor ones installed). I did notice it makes a difference. I'm in the process of refreshing the door inside parts, and will put some on the door when I have those parts out. I covered the plastic transmission cover with "hushmat" as well as the firewall. A lot of people cover the entire interior flooring and shelf area with "hushmat" type covering. In my case, I compromised with both. Edited September 24, 2016 by Atl TR6 Quote Link to post Share on other sites
stuart Posted September 26, 2016 Report Share Posted September 26, 2016 Like this Richard. Also one either side of the tank and inside the doors as well. You dont need to cover the panels entirely as they are used to stop drumming. Stuart. Quote Link to post Share on other sites
Richard71 Posted September 26, 2016 Author Report Share Posted September 26, 2016 Precisely what I was looking for, thanks Stuart! Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.