oldtuckunder Posted July 31, 2016 Report Share Posted July 31, 2016 Hi Folks Whilst going through boxes of bits that came with a car, I came across the following and they have me puzzled what they are for, or from. They came with piles of stuff from a Triumph home, but as there were also boxes of old mini bits as well they could be from anything. The bolts caught my eye as I don't think I have seen any that long before with such a short thread. I don't know if the rubber ring in the clamp tool should be there or just happens to be there? Alan Quote Link to post Share on other sites
DaveN Posted July 31, 2016 Report Share Posted July 31, 2016 The clamp tool is for rubber hydraulic lines to stop fluid loss ie, replacing a brake cylinder. The bolts won't take a nut and washer in safety so I guess they probably are designed to bottom out in a blind hole. Could they be for a mini radius arm? The other bits of iron mongery possible for knocking bushes or bearings out. The curved thingammy bob ....goodness knows! Dave Quote Link to post Share on other sites
graeme Posted July 31, 2016 Report Share Posted July 31, 2016 I think the three bolts are part of a Mini clutch tool. http://www.ebay.co.uk/itm/CLASSIC-MINI-AUSTIN-MINI-CLUTCH-PULLER-SET-SUITABLE-FOR-VERTO-3-IN-1-/182151445047 Cheers Graeme Quote Link to post Share on other sites
oldtuckunder Posted July 31, 2016 Author Report Share Posted July 31, 2016 I think the three bolts are part of a Mini clutch tool. Brilliant! 10 points, goes with this then found in another box. Alan Quote Link to post Share on other sites
billy l Posted July 31, 2016 Report Share Posted July 31, 2016 (edited) Clutch/flywheel puller for a Mini/1100/1300. Edited August 1, 2016 by billy l Quote Link to post Share on other sites
peejay4A Posted July 31, 2016 Report Share Posted July 31, 2016 I'll chip in. It's actually a mini flywheel puller. Quote Link to post Share on other sites
ianc Posted July 31, 2016 Report Share Posted July 31, 2016 I was going to suggest having a word with a gynaecologist, but think the above posts are probably on the right track. Ian Cornish Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.