Jump to content

Recommended Posts

I have some slipping clutch problems. I also have the cylinders being overhauled by Past Parts. Once I have the hydraulics sorted out I will have the gearbox out.

 

In my garage I have been saving this 3 part clutch kit for many years. This may be the time to use it. The number is Borg and Beck 45693/41 size 9 "

 

I have two questions

  1. Is this the correct part for my 58 TR3A
  2. There is some rust on the surface of the cover plate which contacts the clutch lining. I have sanded it off but there are some very small corrosive marks. If this makes a difference to the long term life of the clutch lining shall I have it machined down by 10 thou.? Maybe this will cause more problems.

If this old stock is not correct please advise on the best kit to buy.

 

Thanks Richard & H.

Link to post
Share on other sites

Thanks Bill, That is justthe advice I was looking for.

 

I am just waiting for the hydraulics and then we can decide what to do about the slipping.

 

What else should I do while the gearbox is out?

 

Thanks richard & H.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.