Dave Budenaers Posted June 26, 2016 Report Share Posted June 26, 2016 Hi, I would like to fit an original hardtop to my TR6. Could anyone help me with fitting instructions? Apparently printed instructions have been existing in the past... Many thanks, Dave Quote Link to post Share on other sites
Andrew Smith Posted June 26, 2016 Report Share Posted June 26, 2016 (edited) Hi Dave, Here you go: Cheers Andrew Edited March 7, 2019 by Andrew Smith Quote Link to post Share on other sites
Dave Budenaers Posted June 26, 2016 Author Report Share Posted June 26, 2016 Thanks Andrew, This is exactly what I was looking for! Kind regards, Dave Quote Link to post Share on other sites
mike barrett Posted June 27, 2016 Report Share Posted June 27, 2016 make sure you have all the bits also check the rear rubber spacers are in good condition otherwise the top can damage the paint work. Also you need a couple of people to lift it onto the car, its heavy! I fitted one to my TR6 over the winter and it was very good, quiet and seemed to stiffen the body (I think my chassis is ok). mike Quote Link to post Share on other sites
Dave Budenaers Posted June 30, 2016 Author Report Share Posted June 30, 2016 Thanks for the advice Mike. All the paintwork will be new!! All seals and rubbers will be renewed. Maybe it's better to fit the glass after the top is mounted to the car to keep it lighter. Added stiffness is my first concern since the car will be used as a historic rally car. Dave Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.