Alanretired Posted June 25, 2016 Report Share Posted June 25, 2016 Hi all. Help needed. I am removing the gearbox from a 1974 Tr6 with overdrive. The overdrive mount has two metalastic bobbins at 45 degrees. The small crossmember does not look like it will drop downwards due to being located between the chassis bracket and floorpan. My question is how do I remove the rear mount? Regards Alan Quote Link to post Share on other sites
Alanretired Posted June 25, 2016 Author Report Share Posted June 25, 2016 Hi I have now found a way to remove overdrive mount. I removed metalastic top nuts, slackened engine mounts and jacked up rear of overdrive. This gave access to the nuts that hold the mount bracket to the overdrive. I was then able to remove main mount bracket - job done ( but may not be the correct method). Regards Alan Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.