keith w Posted June 9, 2016 Report Share Posted June 9, 2016 Does anyone know where I can get an original inertia reel seatbelt looked at? It refuses to reel in or out and sadly I removed the side cover which says 'do not remove cover', before I could see the words. There's a spring in there which goes boing all over the garage. ???? I have a replacement but it's not in as good condition. Quote Link to post Share on other sites
stuart Posted June 10, 2016 Report Share Posted June 10, 2016 These guys are really good at belts http://www.quickfitsbs.com/ Stuart. Quote Link to post Share on other sites
TR8IAN Posted June 10, 2016 Report Share Posted June 10, 2016 Agree with Stuart Quote Link to post Share on other sites
stevie-a Posted June 11, 2016 Report Share Posted June 11, 2016 Pull the full belt out and spray loads of this stuff into where the belt goes in, then keep putting the belt in and out. should do the trick http://www.ebay.co.uk/itm/Everbuild-400ml-Silicone-Spray-Ease-Of-Friction-Between-2-Surfaces-/331694481020?var=&hash=item4d3a881e7c:m:mWEMhwiyS_wDhh4gjvjEjHg Quote Link to post Share on other sites
keith w Posted June 12, 2016 Author Report Share Posted June 12, 2016 Thanks for the advice both. Much appreciated. Keith Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.