John Morrison Posted May 16, 2016 Report Share Posted May 16, 2016 Hi Folks, looking for a definative answer and if at all possible a photo of the original TR6 seat belt fitting. The stalk a the floor end, pal in the group, his seems to come off at right angles to the bolt, thats through the floor. All looks a bit odd to me, or is this correct? John. Quote Link to post Share on other sites
Denis Posted May 16, 2016 Report Share Posted May 16, 2016 Your car must be a later model than my 1969 car which still has it's original StanPart Belts that just bolt directly through the floor and through the top of the wheel arches...No Stalks! Quote Link to post Share on other sites
Denis Posted May 16, 2016 Report Share Posted May 16, 2016 Having said that they are reinforced plates with metal loops on the floor which the belt ends hook through. Mine are the old original diagonal and lap type with buckles. Quote Link to post Share on other sites
Mark69 Posted May 16, 2016 Report Share Posted May 16, 2016 My 69 as bolts with loops on the end , situated on top of wheel arch and the bottom of the inner wing panel next to the b post. Quote Link to post Share on other sites
SeanF Posted May 16, 2016 Report Share Posted May 16, 2016 Hi John, If you are talking about the piece that the belt clips into, here is how mine looked just before I stripped them out. Hope this helps. Sean Quote Link to post Share on other sites
Mark69 Posted May 16, 2016 Report Share Posted May 16, 2016 Sorry misread mines the same as Sean's Quote Link to post Share on other sites
John Morrison Posted May 16, 2016 Author Report Share Posted May 16, 2016 Thanks Sean, guys yes thats what i was after. John. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.