DJF Posted March 9, 2016 Report Share Posted March 9, 2016 Just about to order floor panels from Moss, but came across Bastuk. Decent price at mo, although I can't click far enough yet to get a price including delivery. Anyone any experience re fit, quality, delivery etc Quote Link to post Share on other sites
Stevecross Posted March 10, 2016 Report Share Posted March 10, 2016 Only used Bastuk once so far for rear quarter panels for a TR2. Price much better than here and they supply many of the panels we buy from the large companies in the UK. Don't know of the quality of their floor panels though. Their website is hard to use at first. Delivery comes up towards the end of the checkout process but when you click card payment you do not actually pay at that time as they do not take payment online. Later on someone will call you from the company go through your order, give the shipping price and take payment details over the phone. Can't find my invoice ATM but shipping costs were very reasonable and delivery took about 3 days. Quote Link to post Share on other sites
McMuttley Posted March 10, 2016 Report Share Posted March 10, 2016 shipping costs are pretty reasonable and service good Quote Link to post Share on other sites
RogerH Posted March 10, 2016 Report Share Posted March 10, 2016 Hi DJF, Moss do a lot of Bastuk panels. Why not contact Moss and ask for make and best price. Or TRShop in London. Roger Quote Link to post Share on other sites
stuart Posted March 10, 2016 Report Share Posted March 10, 2016 Im very wary of Batuck panels as they seem nice and thick when you get them but they are covered with a thick layer of powdercoat or similar and when you remove that to weld them you will find that they are 20SWG (1mm) instead of original 18SWG(1.2mm) Which isnt good at all for structural panels. The current crop of Heritage floor panels for TR4a/5/6 are still OK and correct gauge although you can see that the dies are starting to wear out so they are getting a bit less defined but they are OK so personally I would go for the Moss/TR Shop option. Stuart. Quote Link to post Share on other sites
Geko Posted March 10, 2016 Report Share Posted March 10, 2016 Im very wary of Batuck panels as they seem nice and thick when you get them but they are covered with a thick layer of powdercoat or similar and when you remove that to weld them you will find that they are 20SWG (1mm) instead of original 18SWG(1.2mm) Which isnt good at all for structural panels. Wow, that's how a business can spoil its reputation.... Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.