ray dore Posted December 10, 2015 Report Share Posted December 10, 2015 Help! I have a problem with the windscreen frame sealing to the body work the two outside rod tighten down and the seal is perfect but in the middle I have a gap between the bottom of the windscreen frame and the bodywork I can not tighten down the three middle bolts anymore to close the gap between the frame and the windscreen the dash top is leather [new] and underneath that is the original hardboard type material any advice would be appreciated many thanks ray Quote Link to post Share on other sites
RogerH Posted December 10, 2015 Report Share Posted December 10, 2015 Hi Ray, have you tried tightening the three dash top screws first then the outside rods. Roger Quote Link to post Share on other sites
ray dore Posted December 10, 2015 Author Report Share Posted December 10, 2015 Hi Roger yes I have thanks Ray Quote Link to post Share on other sites
AlanT Posted December 10, 2015 Report Share Posted December 10, 2015 The three centre fixings are fomed by tabs, with a hole in them, that stick out. These are really weak, bend easily and don't provide much pull. Is the angle of the frame parallel to the window glass? These frames always seem to try to tip backwards. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.