3.08 and 3.9 5-speed axles for sale

[Alec Pringle]

Digging deeper into my piles of assorted surplus ! Before they go on the 'bay . . . . .

 

A trio of 5-speed axles, one is a 3.90, the other two 3.08 . . . . . . the latter high ratio cwp set is now getting harder and harder to find, and costs a packet.

 

All three have been sitting around 10-15 years. The diff internals should be fine - as in remove back plate, wash out, refill with good oil.

 

The 3.9 has the half shaft assemblies, but lacks brakes and propshaft flange. Externally well rusted, but feels decent enough internally.

 

Both 3.08 axles have half shafts and brakes, both decent known quantities that came from running cars and had not covered large mileages. One is rustier externally than t'other, and of course the brakes will require to be dismantled, derusted and rebuilt with new cylinders at least.

 

No I don't know what they're worth, don't seem to come up very often now, but please feel free to send a PM if you're interested . . . . . and with luck you'll probably have a better idea of a sensible price than I do if you're hunting one ! Of course I can send photos if you let me have an email address.

 

Cheers

 

Alec

[Kermimga]

Hi Alec, re the 3.08 axles, where are you located as an axle is clearly a collection only item.

[Alec Pringle]

Bottom corner of Wiltshire, on the Dorset/Somerset border, just off the A303.

 

Cheers

 

Alec

[TR8IAN]

Hi Alec,

 

I have sent you an email.

 

Regards

Ian

[john drew]

has any one got a good working tr8 diff for sale