dick tudhope Posted June 17, 2015 Report Share Posted June 17, 2015 200 mile round trip - Twice, when stationary at lights/low moving traffic - clutch pedal straight to ground with no resistance - could then not change gear - switched off engine and re-started - then OK - had checked fluid reservoir before leaving home and again when challenge occurred - level normal (although looked a sade muddy - continued 90 odd miles mainly motorway/dual carriageway - no repetition of incidents...MANY THANKS FOR ANY IDEAS - BEST, AYE, DICK TUDHOPE.Wyedean Member. Quote Link to post Share on other sites
Peter Cobbold Posted June 17, 2015 Report Share Posted June 17, 2015 (edited) Hi Dick, Welcome to the forum. Our 7 has never done that ...yet. As I think you know the clutch is not disengaging from the flywheel so you get a 'spinning plate' that prevents gear changing. Its not gearbox. Most likely a hydraulic glitch. I'd bleed the system and fill it with fresh fluid. If there are peculiar hydraulic seal issues they may appear while doing that. Peter Edited June 17, 2015 by Peter Cobbold Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.