Tomtr250 Posted March 3, 2015 Report Share Posted March 3, 2015 Hi I'm converting a TR4 to RHD, has anyone got a restorable dash please? Thanks Tom Quote Link to post Share on other sites
mike3md Posted March 3, 2015 Report Share Posted March 3, 2015 Tom, They don't turn up very often, however I believe this is a fellow forumite: http://www.brabazon.org/home/tr4/rhd_conversion/dash (Assuming of course you are starting with a LHD car!) Mike Quote Link to post Share on other sites
Tomtr250 Posted March 3, 2015 Author Report Share Posted March 3, 2015 Thanks Mike If one doesn't turn up I might have a go Tom Quote Link to post Share on other sites
pfenlon Posted March 3, 2015 Report Share Posted March 3, 2015 (edited) Thanks Mike If one doesn't turn up I might have a go Tom Tom its feasible but the end result would be awful unless you covered it with a 4A bit of wood. with all those cuts it would be impossible to have uniformity across the surface. keep looking on the bay. Edited March 3, 2015 by pfenlon Quote Link to post Share on other sites
Steve Brabazon Posted March 4, 2015 Report Share Posted March 4, 2015 Tom its feasible but the end result would be awful unless you covered it with a 4A bit of wood. with all those cuts it would be impossible to have uniformity across the surface. keep looking on the bay. Hi Tom, As I stated on my website. It's not easy, but it can most definitely be uniformity done. It all depends on how good you are at welding. Steve Click on thumbnail Quote Link to post Share on other sites
pfenlon Posted March 4, 2015 Report Share Posted March 4, 2015 Hi Tom, As I stated on my website. It's not easy, but it can most definitely be uniformity done. It all depends on how good you are at welding. Steve Click on thumbnail I stand corrected, and admit my welding skills are at best amateur, well done, it looks good, and I can't see the joints. Quote Link to post Share on other sites
Tom Boyd Posted March 4, 2015 Report Share Posted March 4, 2015 It is very possible to do, rather time consuming and a faff but if you have no other option......... Tom Quote Link to post Share on other sites
Superaquarama Posted March 4, 2015 Report Share Posted March 4, 2015 I got a brand new rhd metal dash from TRGB last year, at a very sensible price. This was in fact a TR4A dash, not sure whether the TR4 one is the same underneath. Quote Link to post Share on other sites
peejay4A Posted March 5, 2015 Report Share Posted March 5, 2015 They are a bit different. Pete Fenlon knows. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.