Mark69 Posted March 2, 2015 Report Share Posted March 2, 2015 I picked up a leather h frame cover this weekend at stoneleigh. Thinking of replacing loom for a new one. So are their any extra switching requirements i should be thinking about before I recover, or maybe one of those NOS cup holders that's been mentioned lately. Mark. Quote Link to post Share on other sites
mike3739 Posted March 2, 2015 Report Share Posted March 2, 2015 NOS Cup Holders a must! Quote Link to post Share on other sites
Cew Posted March 2, 2015 Report Share Posted March 2, 2015 I also picked up a new cover for the H frame but the moulded vinyl type.I have opened out the two holes either side of the interior light switch to take 12v sockets for charging stuff and the like. I was going to use cigar lighters but found some nice discreet ones with spring loaded covers on ebay so will use them. Quote Link to post Share on other sites
Andrew Smith Posted March 2, 2015 Report Share Posted March 2, 2015 NOS Cup Holders a must! Stop it! Cheers Andrew Quote Link to post Share on other sites
GreenhillTR6 Posted March 2, 2015 Report Share Posted March 2, 2015 OE NOS cup holders essential, also allow for feed from new loom for LED interior lighting (colours optional of course) Cheers Quote Link to post Share on other sites
foster461 Posted March 2, 2015 Report Share Posted March 2, 2015 I put a power outlet and also the LED for the OD logic controller in the H support. Where are you guys finding these fancy cup holders ? Stan Quote Link to post Share on other sites
stuart Posted March 3, 2015 Report Share Posted March 3, 2015 Where are you guys finding these fancy cup holders ? Stan Dont encourage them! Stuart. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.