Ian Lynam Posted October 9, 2014 Report Share Posted October 9, 2014 In the rebuild of my TR2 the small spacers between the arms of the top wishbone have gone walkabout! Apparently these are no longer available. Does anyone know the internal and external dimensions of these as I may be able to ask my brother in law to make me a pair. Thanks Ian Quote Link to post Share on other sites
EdwinTiben Posted October 9, 2014 Report Share Posted October 9, 2014 can you show which spacer (on a drawing e.g.) ? Quote Link to post Share on other sites
Les Posted October 9, 2014 Report Share Posted October 9, 2014 (edited) Ian. Externai diameter 1 1/8" Internal diameter 23/32" Thickness 3/8" Check your old ball joints for the spacers, thats where i found mine! Les. Edited October 9, 2014 by Les Quote Link to post Share on other sites
Ian Lynam Posted October 9, 2014 Author Report Share Posted October 9, 2014 Hi, The parts that I'm referring to are those numbered 19 on page 68 of the Moss parts book. They are called "distance pieces" and keep the arms of the wishbones apart as you tighten the nut on the ball joint. I can't include a diagram so hope this is clearer. Thanks Ian Quote Link to post Share on other sites
Ian Lynam Posted October 9, 2014 Author Report Share Posted October 9, 2014 Thanks very much Les. I did check the old ball joints but no luck! Ian Quote Link to post Share on other sites
Bob Smith Posted October 9, 2014 Report Share Posted October 9, 2014 Ian, I have several spares of these spacers (part number 100697) drop me a P.M. if you can't find yours. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.