Jump to content

Recommended Posts

HI,

 

I bought a new upper ball joint for the tr2, but unfortunately this one is dead before driving.. worse, this is the second one new..

 

They are hard to move and feel rough when moved by hand.

 

This immediately influences the steering of the tr2 (which is tough enough by design..)

 

On the other side i re-used my older one which works perfectly.

 

Which of the supplies carries the right quality ones? ( not being rimm...)

 

 

 

Link to post
Share on other sites

Had the same problem two weeks ago from a London supplier, so it's does seem as there are a number of poor quality upper ball joints out there. The supplier said they had never have a problem with them and to send it back, as pp would cost a fair bit I will return it at Stoneleigh and check a few and buy a couple of good ones for stock

 

Alexander.

Link to post
Share on other sites

200772 is the Triumph part no for both sides.

 

http://www.revingtontr.com/shop/product_display.asp?cartype=tr4&productid=200772

 

I have a few bothe NOS & Good used items ranging from Sidem to QH to Alford and Alder

 

Cheers

Peter W

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.