alanwcoote Posted April 17, 2014 Report Share Posted April 17, 2014 Morning Gents Could you advise me of the standard ride hight at the rear, ie ground through wheel center to bottem of wheel arch. Also could do with a piccy of the top of wiper motor to see orientation of the wire that sits on the round part of the lid ( park conection ). Hope that makes sense. Many thanks in advance. Getting happyer Patch Quote Link to post Share on other sites
TR NIALL Posted April 17, 2014 Report Share Posted April 17, 2014 Hi Al,you can only get a correct Measurement from Centre of Wheel to Top of Wheel Arch,different Tyre Pressures will have your Measurements all over the Place. Standard Springs or Uprated and Lowered??? Quote Link to post Share on other sites
alanwcoote Posted April 17, 2014 Author Report Share Posted April 17, 2014 Good point Niall Thats what i am trying to sort, car is hard and high at back and has slight positive camber which i dont like, it has tele shock conversion and i think uprated springs which is holding car high ie spring is not compressing.Trouble is i am thinking back to my 6 and not sure about 5/250 set up, so looking for a start point. Standard set up i guess. Confused Patch Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.