Clarkey Posted April 11, 2014 Report Share Posted April 11, 2014 Bloody hell Neil In the time its taken me to sort out the Rad and O/D wiring . you've got the bugger painted!!!!! Looking really nice fella Quote Link to post Share on other sites
mike3739 Posted April 11, 2014 Report Share Posted April 11, 2014 Hi Neil, I clearly missed you'd picked up another project - what's the story behind it, or did I miss that too? Looks like a lovely job mate! Cheers Andrew No Mudflaps will be fitted Andrew!! Cheers Mike Quote Link to post Share on other sites
Guest ntc Posted April 11, 2014 Report Share Posted April 11, 2014 Thanks for the help today Paul bit more to do yet Martin Quote Link to post Share on other sites
Birdseye Posted April 25, 2014 Report Share Posted April 25, 2014 Hi Neil, firstly it looks like a first rate job, really envious of the restoration and if you could see my rust bucket you would know why.. I started a full restoration of my 6 a few years back but needed to put it on hold and have since lost most of my photos and measurements. Just wondering if you have any measurements of the front end (bulkhead and forward) and any photos you would be willing to share. I have owned the car since 1978, had it in storage since 1983 and would dearly love to see it back on the road where it belongs. Anything you have would be appreciated. Thanks in anticipation. Ross Quote Link to post Share on other sites
Guest ntc Posted April 25, 2014 Report Share Posted April 25, 2014 Ross Pm me any measurements that you require and I will oblige,an email address would be helpful also by pm Quote Link to post Share on other sites
Guest ntc Posted May 3, 2014 Report Share Posted May 3, 2014 Well what dickhead would rebuild an engine and miss something like this ?full strip down tomorrow Quote Link to post Share on other sites
Phil Kirk Posted May 3, 2014 Report Share Posted May 3, 2014 Oh ouch!! hope you do not find any other nasties! Good Luck Cheers Phil Quote Link to post Share on other sites
Guest ntc Posted May 3, 2014 Report Share Posted May 3, 2014 Hi Phil Thanks end float on the pedestal incorrect as was the cam float lucky I have a nos Cp cam but not a good dog drive so have friends trying to sort me one out Quote Link to post Share on other sites
Guest ntc Posted May 7, 2014 Report Share Posted May 7, 2014 Sorted rebuilt (as it should be ) lump goes in tomorrow and yes big valves Quote Link to post Share on other sites
Kevo_6 Posted May 7, 2014 Report Share Posted May 7, 2014 Nice Neil, looks like things are progressing nicely. Quote Link to post Share on other sites
Phil Kirk Posted May 7, 2014 Report Share Posted May 7, 2014 Hi, Neil, That was quick work! glad to hear you have it sorted and are back on track. Cheers Phil Quote Link to post Share on other sites
TR NIALL Posted May 8, 2014 Report Share Posted May 8, 2014 Lookin Good Neil,ready for Harrogate I presume. Quote Link to post Share on other sites
dblenk Posted May 9, 2014 Report Share Posted May 9, 2014 Hi Neil looking great hopefully both of us there for Harrogate cheers DAvid Quote Link to post Share on other sites
marko Posted May 9, 2014 Report Share Posted May 9, 2014 That's a great looking project Neil - Where did you get it from? Quote Link to post Share on other sites
Guest ntc Posted May 9, 2014 Report Share Posted May 9, 2014 (edited) http://www.classicmarks.co.uk/ you should see it now Edited May 9, 2014 by ntc Quote Link to post Share on other sites
Gordon Bayley Posted May 10, 2014 Report Share Posted May 10, 2014 Looking good Neil, Have you any photos before the rebuild , what work did you do to the chassis , Quote Link to post Share on other sites
Guest ntc Posted December 27, 2014 Report Share Posted December 27, 2014 Here you go Tom as you asked for progress Quote Link to post Share on other sites
RobinTR6 Posted December 27, 2014 Report Share Posted December 27, 2014 Neil, looking good, is this for you or........ Quote Link to post Share on other sites
Andrew Smith Posted December 27, 2014 Report Share Posted December 27, 2014 Not another white one in the NTC household.......... Looking good Neil! Cheers Andrew Quote Link to post Share on other sites
mike3739 Posted December 27, 2014 Report Share Posted December 27, 2014 Like it Neil what you doing with the engine or have I missed it? Hope you had a fantastic Christmas & here's to a "Happy New Year" to yourself Denise & Emma. Cheers Mike Quote Link to post Share on other sites
TRTOM2498PI Posted December 27, 2014 Report Share Posted December 27, 2014 Hi NTC, Fancy bumping into you today. ! Car looking good, White always looks good in the TR range, especially the 6. ! Hope you got what you wanted today. Cheers. Quote Link to post Share on other sites
Clarkey Posted December 28, 2014 Report Share Posted December 28, 2014 Neil don't let Clarkey near Rear Suspension or Cooling System Couldn't help myself!! Cheers Mike Mike you can have the Suspension Quip , but ill have you know theres nothing wrong with my plumbing skills Quote Link to post Share on other sites
Mark69 Posted December 29, 2014 Report Share Posted December 29, 2014 Hi Neil Looks a cracking job your doing there, I like the paint job , what colour white did you go for . Mine will be white, but not keen on original white too stark. Looking for a softer shade preferably in the triumph range. Mark Quote Link to post Share on other sites
Guest ntc Posted December 29, 2014 Report Share Posted December 29, 2014 Mark Cheers I agree with your comment re white ( hard had on ) best by pm and a chat. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.