e_ingemann Posted March 13, 2014 Report Share Posted March 13, 2014 (edited) Hi, Are the two types of Girling rear wheel cylinders interchangeable, what decides which is used? Cheers, Esben Edited March 13, 2014 by e_ingemann Quote Link to post Share on other sites
mike ellis Posted March 13, 2014 Report Share Posted March 13, 2014 Hi Esben, In theory they are interchangeable but you should be aware that when the flat piston cylinders were fitted the shoes were held to the backplate by a peg and spring arrangement. At TS15332 this was replaced by the slotted piston type and the shoes were located only by a steady post, I assume that the slots were considered to give enough location. The Moss catalogue shows all this plus the third peg design used on the later 9 inch brakes. Whatever you fit make sure you do the same each side. Mike Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.