Jump to content

Front suspension rebuild

Guest barry100

Recommended Posts

Guest barry100

Hi All

I'm going to rebuild my front suspension to-morrow, according to my w/shop manual I have set the bottom trunion clearance and the lock stops,some one told me I must also  set the threaded part of the trunion ( to give king pin inclination etc)

or does one just screw it up as far as it can go. a bit of advice would be helpfull-- Barry

Link to post
Share on other sites
or does one just screw it up as far as it can go

That's it (with the bolt of the lock stops not in place).

To compress the spring, you will need the special tool or a threaded rod with nuts and washers.

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...

Important Information

Please familiarise yourself with our Terms and Conditions. By using this site, you agree to the following: Terms of Use.