15eren Posted December 25, 2013 Report Share Posted December 25, 2013 With this simple home-made tool it is a real pleasure to remove and refit the diff. Merry christmas Tage Quote Link to post Share on other sites
AlanT Posted December 25, 2013 Report Share Posted December 25, 2013 (edited) Thanks for showing this. What is distance between the two V's. Usual to measure from the centre-to-centre on a thing like this. Sketch or drawing would be good. Al. Edited December 25, 2013 by AlanT Quote Link to post Share on other sites
15eren Posted December 25, 2013 Author Report Share Posted December 25, 2013 Hi Al The distance between the two V´s is 300 mm (centre-to-centre) and the heigh from the bar to the V´s is 100 mm. And the tap must fit pretty firmly in the hole in the jack. Hope that helps. Tage Quote Link to post Share on other sites
AlanT Posted December 26, 2013 Report Share Posted December 26, 2013 (edited) Certainly saves me crawling under to make the measurement. Thanks for this topic. Al. Edited December 26, 2013 by AlanT Quote Link to post Share on other sites
Blue cedar Posted November 22, 2015 Report Share Posted November 22, 2015 Tage. Your wife is very accommodating letting you do all that in the kitchen. Let alone being able to open the cupboard doors. At least the Amtico flooring won't mark ! Peter Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.